Mathieson, J.G, Somerville, M.A, Deev, A. and Jahanshahi, S. (2015). Chapter 19: “Utilization of biomass as an alternative fuel in ironmaking”, in Iron Ore Mineralogy, Processing and Environmental Sustainability, pp.581-614, Edited by Liming Lu, Woodhead publishing series in Metals and Surface Engineering, UK.
Jahanshahi, S., Mathieson, J.G., and Reimink, H. Low Emission Steelmaking, Journal of Sustainable Metallurgy, 2016, June, pp 1-6, DOI 10.1007/s40831-016-0065-5.
Somerville, Michael; and Jahanshahi Sharif; The effect of temperature and compression during pyrolysis on the density of charcoal made from Australian eucalypt wood, Journal of Renewal Energy, 2015, 8, 31, pp. 471-478.
Jahanshahi, S., Mathieson, J.G., Somerville, M.A., Haque, N., Norgate, T.E., Deev, A., Pan, Y., Xie, D., Ridgeway, P. and Zulli, P., Development of Low-Emission Integrated Steelmaking Process, J. Sustain. Metall., 2015, DOI 10.1007/s40831-015-0008-6.
Lu, Liming; Adam, Matt; Kilburn, Matt; Hapugoda, Sarath; Somerville, Michael; Jahanshahi, Sharif; Mathieson, John (2013) Substitution of charcoal for coke breeze in iron ore sintering, ISIJ International, 53(9), 1607-1616.
Mathieson, John; Rogers, Harold; Somerville, Michael; Jahanshahi, Sharif (2012) Reducing net CO2 emissions using charcoal as a blast furnace tuyere injectant, ISIJ International, 52 (8), 1489-1496.
Norgate, Terry; Haque, Nawshad; Somerville, Michael; Jahanshahi, Sharif (2012) Biomass as a source of renewable carbon for iron and steelmaking, ISIJ International, 52 (8), 1472-1481.
Jahanshahi, S. (2008). Harnessing biomass to fuel Australia’s growth; ATSE Focus Green Power, 152, October pp. 24-25
Jahanshahi, S. (2008) Emerging Technologies for deep cuts in greenhouse gas emissions by the steel industry, AusIMM Bulletin, 5, 22-28.
Xie, D., Washington, B.M., Norgate, T.E., Jahanshahi, S. (2005) Dry granulation of slags - turning waste into valuable products, Current advances in materials and processes (CAMP-ISIJ), 18(4), 1088-1091.
Jahanshahi, Sharif; Deev, Alex; Haque, Nawshad; Lu, Liming; Mathieson, John; Norgate, Terry (2014) Current status and future direction of low-emission Integrated Steelmaking Process. In: Mackey, P.J.; Grimsey, E.J.; Jones, R.T.; Brooks, G.A., editor/s. Celebrating the Megascale: Proceedings of the Extraction and Processing Division Symposium on Pyrometallurgy in Honor of David G.C. Robertson; 16-20 February 2014; San Diego, California, USA. John Wiley & Sons on behalf of The Minerals, Metals & Materials Society (TMS); 2014. 303-316.
Deev, Alex; Jahanshahi, Sharif (2012) Development of a pyrolysis technology to produce large quantities of charcoal for the iron and steel industry. In: 6th International Congress on the Science & Technology of Ironmaking - ICSTI 2012; 14-18 October 2012; Rio de Janeiro, Brazil. Brazilian Association for Metallurgy, Materials and Mining (ABM); 2012. 1132-1142.
Jahanshahi, Sharif; Pan, Yuhua; Xie, Dongsheng (2012) Some fundamental aspects of the dry slag granulation process. In: 9th International Conference on Molten Slags, Fluxes and Salts (MOLTEN12); 27-30 May 2012; Beijing, China. Chinese Society for Metals; 2012. 12p. CD ROM
Jahanshahi, Sharif; Xie, Dongsheng (2012) Current status and future direction of CSIRO's dry slag granulation process with waste heat recovery. In: 5th International Congress on the Science and Technology of Steelmaking 2012 (ICS 2012); 1-3 October 2012; Dresden, Germany. ICS 2012 Organisers; 2012. 9p. CD ROM
Lu, Liming; Adam, Matt; Somerville, Michael; Hapugoda, Sarath; Jahanshahi, Sharif; Mathieson, John (2012) Iron ore sintering with charcoal. In: 6th International Congress on the Science & Technology of Ironmaking - ICSTI 2012; 14-18 October 2012; Rio de Janeiro, Brazil. Brazilian Association for Metallurgy, Materials and Mining (ABM); 2012. 1121-1131.
Mathieson, John; Norgate, Terry; Jahanshahi, Sharif; Somerville, Michael; Haque, Nawshad; Deev, Alex; Ridgeway, Philip; Zulli, Paul (2012) The potential for charcoal to reduce net greenhouse gas emissions from the Australian steel industry. In: 6th International Congress on the Science & Technology of Ironmaking - ICSTI 2012; 14-18 October 2012; Rio de Janeiro, Brazil. Brazilian Association for Metallurgy, Materials and Mining (ABM); 2012. 1602-1613.
Norgate, Terry; Xie, Dongsheng; Jahanshahi, Sharif (2012) Economic and environmental evaluation of slag dry granulation. In: SCANMET IV - 4th International Conference on Process Development in Iron and Steelmaking; 10-13 June 2012; Lulea, Sweden. Lulea, Sweden: SCANMET Organisers; 2012. 10p. CD ROM
Norgate, Terry; Xie, Dongsheng; Jahanshahi, Sharif (2012) Technical and economic evaluation of slag dry granulation. In: AISTech 2012 - The Iron & Steel Technology Conference and Exposition; 7-10 May 2012; Atlanta, Georgia, USA. Association for Iron & Steel Technology (AIST); 2012. 35-46.
Jahanshahi, Sharif; Xie, Dongsheng; Pan, Yuhua (2011) Dry granulation of molten slags: an attractive option for sustainable processing. In: Mario Sanchez, editor/s. Clean Mining 2011 - 9th International Conference on Clean Technologies for the Mining Industry; 10-12 April 2011; Santiago, Chile. Santiago, Chile: Gecamin, Chile; 2011. CD ROM.
Jahanshahi, Sharif; Xie, Dongsheng; Pan, Yuhua; Ridgeway, Philip; Mathieson, John (2011) Dry slag granulation with integrated heat recovery. In: 1st International Conference on Energy Efficiency and CO2 Reduction in the Steel Industry (EECR Steel 2011) - incorporated in METEC InSteelCon 2011; 27 June - 1 July 2011; Dusseldorf, Germany. The Steel Institute VDEh; 2011. Session 13, 7 pages. CD ROM
Mathieson, John; Rogers, Harold; Somerville, Michael; Jahanshahi, Sharif; Ridgeway, Philip (2011) Potential for the use of biomass in the iron and steel industry. In: Chemeca 2011; 18-21 September 2011; Sydney, NSW, Australia. Engineers Australia; 2011. 1065-1076.
Norgate, Terry; Haque, Nawshad; Somerville, Michael; Jahanshahi, Sharif (2011) The greenhouse gas footprint of charcoal production and of some applications in steelmaking. In: 7th Australian Conference on Life Cycle Assessment; 9-10 March 2011; Melbourne, Vic, Australia. Australian Life Cycle Assessment Society; 2011. 12p. CD ROM
Somerville, Michael; Davies, Michael; Mathieson, John; Ridgeway, Philip; Jahanshahi, Sharif (2011) Addition of renewable carbon to liquid steel: Plant trials at OneSteel Sydney Steel Mill. In: Chemeca 2011; 18-21 September 2011; Sydney, NSW, Australia. CD ROM
Mathieson, John, Rogers, Harold, Somerville, Michael, Ridgeway, Philip, Jahanshahi, Sharif (2011) Use of biomass in the iron and steel industry - An Australian perspective. In: 1st International Conference on Energy Efficiency and CO2 Reduction in the Steel Industry (EECR Steel 2011) - incorporated in METEC InSteelCon 2011; 27 June - 1 July 2011; Dusseldorf, Germany. The Steel Institute VDEh; 2011. 10p. CD ROM.
Somerville, Michael, Davies, Michael, Mathieson, John, Ridgeway, Philip, Jahanshahi, Sharif (2011) Addition of renewable carbon to liquid steel: Plant trials at OneSteel Sydney Steel Mill. In: Chemeca 2011; 18-21 September 2011; Sydney, NSW, Australia. Engineers Australia; 2011. Paper 310. CD ROM
Krull, Evelyn, Kookana, Rai, Smernik, Ronald, McBeath, Anna, Jahanshahi, Sharif, McGowan, Janine (2010) Agronomic and environmental implications of biochar sourcing, production and application. In: 3rd International Biochar Conference IBI 2010 Progressing from Terra Preta de Indois to the Whole World; 13-16 September 2010; Rio de Janeiro. IBI; 2010. CD ROM.
Somerville, M.A., Jahanshahi, S., Ridgeway, P., Davies, M., Mathieson, J.G. (2010) Sustainable carbon in steel making: Plant trials at the Sydney steel mill. In: Sustainable Mining 2010 - The Business Case; 17-19 August 2010; Kalgoorlie, WA, Australia. AusIMM; 2010. 38-52.
Xie, D., Jahanshahi, S., Norgate, T.E. (2010) Dry granulation to provide a sustainable solution for slag treatment. In: Sustainable Mining 2010 - The Business Case; 17-19 August 2010; Kalgoorlie, WA, Australia. AusIMM; 2010. 22-28.
Xie, Dongsheng, Norgate, Terry, Jahanshahi, Sharif (2010) A new integrated dry slag granulation and heat recovery process. In: Dr Robert McCaffrey, editor/s. The 6th Global Slag Conference; 22-23 November 2010; Sydney, Australia. Surrey, UK: PRo Publications International Ltd; 2010. Paper 11, CD ROM..
Somerville, M. A., Mathieson, J. G., Ridgeway, P. and Jahanshahi, S. (2009) Preparation of low volatile charcoal for liquid steel recarburisation plant trials. In: 1st Asia Pacific Biochar Conference, 17-20 May 2009, Gold Coast, Qld, Australia. 50. CD ROM.
Somerville, M. A., Mathieson, J. G., Ridgeway, P. and Jahanshahi, S. (2009) Development of sustainable fuels and reductants for the iron and steel industry In: 1st Asia Pacific Biochar Conference, 17-20 May 2009, Gold Coast, Qld, Australia. 60. CD ROM.
Xie, D., and Jahanshahi, S. (2008) Waste Heat Recovery from Molten Slags, In: ICS2008, 4th International Congress on the Science and Technology of Steelmaking, Gifu, Japan, 6-8 October 2008, CD ROM, 674-678.
Jahanshahi, S., Mathieson, J. G., and Ridgeway, P. (2008) Overview of the CO2 breakthrough program and linkage to IISI. In: CSRP'08: 2nd Annual Conference, 18-19 November 2008, Brisbane, Qld, Australia, CD ROM, 17-20.
Jahanshahi, S., Mathieson, J. G., Norgate, T. E., Ridgeway, P., Somerville, M. A., and Xie, D. (2008) Opportunities for reducing energy consumption and greenhouse gas emissions in metal production. In: 3rd International Symposium on Sustainable Material Engineering, 4-5 October 2008, Sendai, Japan. 4 pp. CD ROM.
Haque, M. N., Somerville, M. A., Jahanshahi, S., Mathieson, J. G, and Ridgeway, P. (2008) Survey of sustainable biomass resources for the iron and steel industry. In: CSRP'08: 2nd Annual Conference, 18-19 November 2008, Brisbane, Qld, Australia. 21-22.
Xie, D., Pan, Y., Flann, R. C., Washington, B. M., Sanetsis, S., Donnelly, J., Norgate, T. E., and Jahanshahi, S. (2007) Heat recovery from slag through dry granulation. In: 1st CSRP Annual Conference, 21-22 November 2007, Melbourne, Victoria, Australia. 29-30.
Norgate, T. E., Xie, D., Jahanshahi, S., and Russell, M. (2007) Utilisation of slag waste heat in steel plants. In: 1st CSRP Annual Conference, 21-22 November 2007, Melbourne, Victoria, Australia. 25-27.
Xie, D., Washington, B. M., Norgate, T. E., and Jahanshahi, S. (2005) Dry granulation of slags - turning waste into valuable products. Current Advances in Materials and Processes (CAMP-ISIJ), 18 (4): 1088-1091.
Jahanshahi, S., Mathieson, J.G., and Reimink, H. Low Emission Steelmaking, Journal of Sustainable Metallurgy, 2016, June, pp 1-6, DOI 10.1007/s40831-016-0065-5.
Somerville, Michael; and Jahanshahi Sharif; The effect of temperature and compression during pyrolysis on the density of charcoal made from Australian eucalypt wood, Journal of Renewal Energy, 2015, 8, 31, pp. 471-478.
Jahanshahi, S., Mathieson, J.G., Somerville, M.A., Haque, N., Norgate, T.E., Deev, A., Pan, Y., Xie, D., Ridgeway, P. and Zulli, P., Development of Low-Emission Integrated Steelmaking Process, J. Sustain. Metall., 2015, DOI 10.1007/s40831-015-0008-6.
Lu, Liming; Adam, Matt; Kilburn, Matt; Hapugoda, Sarath; Somerville, Michael; Jahanshahi, Sharif; Mathieson, John (2013) Substitution of charcoal for coke breeze in iron ore sintering, ISIJ International, 53(9), 1607-1616.
Mathieson, John; Rogers, Harold; Somerville, Michael; Jahanshahi, Sharif (2012) Reducing net CO2 emissions using charcoal as a blast furnace tuyere injectant, ISIJ International, 52 (8), 1489-1496.
Norgate, Terry; Haque, Nawshad; Somerville, Michael; Jahanshahi, Sharif (2012) Biomass as a source of renewable carbon for iron and steelmaking, ISIJ International, 52 (8), 1472-1481.
Jahanshahi, S. (2008). Harnessing biomass to fuel Australia’s growth; ATSE Focus Green Power, 152, October pp. 24-25
Jahanshahi, S. (2008) Emerging Technologies for deep cuts in greenhouse gas emissions by the steel industry, AusIMM Bulletin, 5, 22-28.
Xie, D., Washington, B.M., Norgate, T.E., Jahanshahi, S. (2005) Dry granulation of slags - turning waste into valuable products, Current advances in materials and processes (CAMP-ISIJ), 18(4), 1088-1091.
Jahanshahi, Sharif; Deev, Alex; Haque, Nawshad; Lu, Liming; Mathieson, John; Norgate, Terry (2014) Current status and future direction of low-emission Integrated Steelmaking Process. In: Mackey, P.J.; Grimsey, E.J.; Jones, R.T.; Brooks, G.A., editor/s. Celebrating the Megascale: Proceedings of the Extraction and Processing Division Symposium on Pyrometallurgy in Honor of David G.C. Robertson; 16-20 February 2014; San Diego, California, USA. John Wiley & Sons on behalf of The Minerals, Metals & Materials Society (TMS); 2014. 303-316.
Deev, Alex; Jahanshahi, Sharif (2012) Development of a pyrolysis technology to produce large quantities of charcoal for the iron and steel industry. In: 6th International Congress on the Science & Technology of Ironmaking - ICSTI 2012; 14-18 October 2012; Rio de Janeiro, Brazil. Brazilian Association for Metallurgy, Materials and Mining (ABM); 2012. 1132-1142.
Jahanshahi, Sharif; Pan, Yuhua; Xie, Dongsheng (2012) Some fundamental aspects of the dry slag granulation process. In: 9th International Conference on Molten Slags, Fluxes and Salts (MOLTEN12); 27-30 May 2012; Beijing, China. Chinese Society for Metals; 2012. 12p. CD ROM
Jahanshahi, Sharif; Xie, Dongsheng (2012) Current status and future direction of CSIRO's dry slag granulation process with waste heat recovery. In: 5th International Congress on the Science and Technology of Steelmaking 2012 (ICS 2012); 1-3 October 2012; Dresden, Germany. ICS 2012 Organisers; 2012. 9p. CD ROM
Lu, Liming; Adam, Matt; Somerville, Michael; Hapugoda, Sarath; Jahanshahi, Sharif; Mathieson, John (2012) Iron ore sintering with charcoal. In: 6th International Congress on the Science & Technology of Ironmaking - ICSTI 2012; 14-18 October 2012; Rio de Janeiro, Brazil. Brazilian Association for Metallurgy, Materials and Mining (ABM); 2012. 1121-1131.
Mathieson, John; Norgate, Terry; Jahanshahi, Sharif; Somerville, Michael; Haque, Nawshad; Deev, Alex; Ridgeway, Philip; Zulli, Paul (2012) The potential for charcoal to reduce net greenhouse gas emissions from the Australian steel industry. In: 6th International Congress on the Science & Technology of Ironmaking - ICSTI 2012; 14-18 October 2012; Rio de Janeiro, Brazil. Brazilian Association for Metallurgy, Materials and Mining (ABM); 2012. 1602-1613.
Norgate, Terry; Xie, Dongsheng; Jahanshahi, Sharif (2012) Economic and environmental evaluation of slag dry granulation. In: SCANMET IV - 4th International Conference on Process Development in Iron and Steelmaking; 10-13 June 2012; Lulea, Sweden. Lulea, Sweden: SCANMET Organisers; 2012. 10p. CD ROM
Norgate, Terry; Xie, Dongsheng; Jahanshahi, Sharif (2012) Technical and economic evaluation of slag dry granulation. In: AISTech 2012 - The Iron & Steel Technology Conference and Exposition; 7-10 May 2012; Atlanta, Georgia, USA. Association for Iron & Steel Technology (AIST); 2012. 35-46.
Jahanshahi, Sharif; Xie, Dongsheng; Pan, Yuhua (2011) Dry granulation of molten slags: an attractive option for sustainable processing. In: Mario Sanchez, editor/s. Clean Mining 2011 - 9th International Conference on Clean Technologies for the Mining Industry; 10-12 April 2011; Santiago, Chile. Santiago, Chile: Gecamin, Chile; 2011. CD ROM.
Jahanshahi, Sharif; Xie, Dongsheng; Pan, Yuhua; Ridgeway, Philip; Mathieson, John (2011) Dry slag granulation with integrated heat recovery. In: 1st International Conference on Energy Efficiency and CO2 Reduction in the Steel Industry (EECR Steel 2011) - incorporated in METEC InSteelCon 2011; 27 June - 1 July 2011; Dusseldorf, Germany. The Steel Institute VDEh; 2011. Session 13, 7 pages. CD ROM
Mathieson, John; Rogers, Harold; Somerville, Michael; Jahanshahi, Sharif; Ridgeway, Philip (2011) Potential for the use of biomass in the iron and steel industry. In: Chemeca 2011; 18-21 September 2011; Sydney, NSW, Australia. Engineers Australia; 2011. 1065-1076.
Norgate, Terry; Haque, Nawshad; Somerville, Michael; Jahanshahi, Sharif (2011) The greenhouse gas footprint of charcoal production and of some applications in steelmaking. In: 7th Australian Conference on Life Cycle Assessment; 9-10 March 2011; Melbourne, Vic, Australia. Australian Life Cycle Assessment Society; 2011. 12p. CD ROM
Somerville, Michael; Davies, Michael; Mathieson, John; Ridgeway, Philip; Jahanshahi, Sharif (2011) Addition of renewable carbon to liquid steel: Plant trials at OneSteel Sydney Steel Mill. In: Chemeca 2011; 18-21 September 2011; Sydney, NSW, Australia. CD ROM
Mathieson, John, Rogers, Harold, Somerville, Michael, Ridgeway, Philip, Jahanshahi, Sharif (2011) Use of biomass in the iron and steel industry - An Australian perspective. In: 1st International Conference on Energy Efficiency and CO2 Reduction in the Steel Industry (EECR Steel 2011) - incorporated in METEC InSteelCon 2011; 27 June - 1 July 2011; Dusseldorf, Germany. The Steel Institute VDEh; 2011. 10p. CD ROM.
Somerville, Michael, Davies, Michael, Mathieson, John, Ridgeway, Philip, Jahanshahi, Sharif (2011) Addition of renewable carbon to liquid steel: Plant trials at OneSteel Sydney Steel Mill. In: Chemeca 2011; 18-21 September 2011; Sydney, NSW, Australia. Engineers Australia; 2011. Paper 310. CD ROM
Krull, Evelyn, Kookana, Rai, Smernik, Ronald, McBeath, Anna, Jahanshahi, Sharif, McGowan, Janine (2010) Agronomic and environmental implications of biochar sourcing, production and application. In: 3rd International Biochar Conference IBI 2010 Progressing from Terra Preta de Indois to the Whole World; 13-16 September 2010; Rio de Janeiro. IBI; 2010. CD ROM.
Somerville, M.A., Jahanshahi, S., Ridgeway, P., Davies, M., Mathieson, J.G. (2010) Sustainable carbon in steel making: Plant trials at the Sydney steel mill. In: Sustainable Mining 2010 - The Business Case; 17-19 August 2010; Kalgoorlie, WA, Australia. AusIMM; 2010. 38-52.
Xie, D., Jahanshahi, S., Norgate, T.E. (2010) Dry granulation to provide a sustainable solution for slag treatment. In: Sustainable Mining 2010 - The Business Case; 17-19 August 2010; Kalgoorlie, WA, Australia. AusIMM; 2010. 22-28.
Xie, Dongsheng, Norgate, Terry, Jahanshahi, Sharif (2010) A new integrated dry slag granulation and heat recovery process. In: Dr Robert McCaffrey, editor/s. The 6th Global Slag Conference; 22-23 November 2010; Sydney, Australia. Surrey, UK: PRo Publications International Ltd; 2010. Paper 11, CD ROM..
Somerville, M. A., Mathieson, J. G., Ridgeway, P. and Jahanshahi, S. (2009) Preparation of low volatile charcoal for liquid steel recarburisation plant trials. In: 1st Asia Pacific Biochar Conference, 17-20 May 2009, Gold Coast, Qld, Australia. 50. CD ROM.
Somerville, M. A., Mathieson, J. G., Ridgeway, P. and Jahanshahi, S. (2009) Development of sustainable fuels and reductants for the iron and steel industry In: 1st Asia Pacific Biochar Conference, 17-20 May 2009, Gold Coast, Qld, Australia. 60. CD ROM.
Xie, D., and Jahanshahi, S. (2008) Waste Heat Recovery from Molten Slags, In: ICS2008, 4th International Congress on the Science and Technology of Steelmaking, Gifu, Japan, 6-8 October 2008, CD ROM, 674-678.
Jahanshahi, S., Mathieson, J. G., and Ridgeway, P. (2008) Overview of the CO2 breakthrough program and linkage to IISI. In: CSRP'08: 2nd Annual Conference, 18-19 November 2008, Brisbane, Qld, Australia, CD ROM, 17-20.
Jahanshahi, S., Mathieson, J. G., Norgate, T. E., Ridgeway, P., Somerville, M. A., and Xie, D. (2008) Opportunities for reducing energy consumption and greenhouse gas emissions in metal production. In: 3rd International Symposium on Sustainable Material Engineering, 4-5 October 2008, Sendai, Japan. 4 pp. CD ROM.
Haque, M. N., Somerville, M. A., Jahanshahi, S., Mathieson, J. G, and Ridgeway, P. (2008) Survey of sustainable biomass resources for the iron and steel industry. In: CSRP'08: 2nd Annual Conference, 18-19 November 2008, Brisbane, Qld, Australia. 21-22.
Xie, D., Pan, Y., Flann, R. C., Washington, B. M., Sanetsis, S., Donnelly, J., Norgate, T. E., and Jahanshahi, S. (2007) Heat recovery from slag through dry granulation. In: 1st CSRP Annual Conference, 21-22 November 2007, Melbourne, Victoria, Australia. 29-30.
Norgate, T. E., Xie, D., Jahanshahi, S., and Russell, M. (2007) Utilisation of slag waste heat in steel plants. In: 1st CSRP Annual Conference, 21-22 November 2007, Melbourne, Victoria, Australia. 25-27.
Xie, D., Washington, B. M., Norgate, T. E., and Jahanshahi, S. (2005) Dry granulation of slags - turning waste into valuable products. Current Advances in Materials and Processes (CAMP-ISIJ), 18 (4): 1088-1091.